T-Cut Rust Magic Review

T-Cut Rust Magic Review

T-Cut Rust Magic review filed by Joel Helmes.

T-Cut Rust Magic Review
T-Cut Rust Magic Review – surface prep is a priority to get the best result.

Whenever a product promises “Instant Results” it’s always nice to stand back and watch to see if that’s exactly what you get.

T-Cut Rust Magic promises just that and I’ve got to say, in my road test of the rust converter, I reckon you could safely call it a case of instant results.

As the photos show, I collected three quite difference pieces of metal, one of which was a very heavily rusted pin or spacer. It was this piece of scrap that I thought would provide the biggest challenge to Rust Magic.

T-Cut Rust Magic Review
T-Cut Rust Magic Review.

Following the instructions, I first gave about half of each of the three pieces of metal a good going over with a wire brush. After a quick clean off with a cloth I pulled the lid off the 10ml applicator pen and pushed it in to get the product flowing (as the photo shows it comes out quite freely).

T-Cut Rust Magic Review - after a minute or two you could see the product doing its thing.
T-Cut Rust Magic Review – after a minute or two you could see the product doing its thing.

It’s then a simple case of painting on a good liberal amount of the product onto the rust.

Within 5 minutes the rust had changed colour to a blue/black colour and then within half an hour you could see that the surface was looking healthier and the rust was looking decidedly ‘beaten’.

T-Cut tell us that Rust Magic will cure the rust and prevent it returning and within three hours of treatment you will be able to paint over the rusty surface – very impressive.

T-Cut Rust Magic Review
T-Cut Rust Magic Review – the smooth surface left after the treatment is ready to paint in three hours.

Great for small/fiddly pieces that need a rust treatment, T-Cut Rust Magic is available to purchase now in the Altrex Auto Accessories Online Store.

Be the first to comment

Leave a Reply

Your email address will not be published.


*